Anta Ribalta 3D Futura for Hammer Logic Configuration Base Giesse
This configuration for folding door contains the following items Giesse:
| article || Description || Amount || Color |
| 04707V || Group based fittings hammer logic || 1 || neutral |
| 04711xxx || lower and upper hinges Group || 1 || choice |
| 04202000 || arm type 2 from 560 to 1700mm || * 1 arm || neutral |
| 04203000 || arm type 1 from 390 to 550mm || * 1 arm || neutral |
| 02476xxx || hammer model Prima Plus ** || 1 || choice |
The choice of color is determined by the customer selecting the appropriate option.
* You will be given one arm between the three proposed (your choice by selecting the second option).
** On request it is also possible to have the model hammer First Key, Euro or Asia. Optional items (sold separately on Windowo):
- vertical and horizontal additional closures (Art. 04.77 million), required for doors with a height or width greater than 1200mm;
- Additional arm (art. 04301000), which is compulsory for windows and doors with increased leaf width of 1020mm;
- Items to be used in case of a second door (combined group door hinges art. 04711xxx, hinge connecting arm combined with art. 04728000, bidirectional deadbolt Art. 02191000 and meeting its superior art. 01348000).
locking mechanisms to Anta Ribalta for hammer, in the Logic version. Referral, towing, toe movement and meetings in zama with GS Silver Plus finish (up to 500 h of corrosion resistance). Screws and set screws in stainless steel. Raising polyamide. Code: 047011
Group hinges (upper and lower), completely pre-assembled and ready to be installed on the profile. Body in extruded aluminum and brass hinges. Supports in zamak with GS Silver Plus finish (up to 500 h of corrosion resistance). Pins, screws and set screws in stainless steel. Code: 04202 (Arm Type 2) - 04203 (Arm Type 1)
Allow the flap opening in conjunction with the mechanisms. Body, fixing block and drawstring in zama with GS Silver Plus finish (up to 500 h of corrosion resistance). Rod, rod, screws and stainless steel screws. Diskette stop polyamide. Code: 02476 - Hammer First Plus
Martellina on both sides for the actuation of the Giesse mechanisms.
The handle, die-cast aluminum, it blends aesthetically with the Cremona line before. E 'of the positioner fitted to the stopping of the rotation to 90 °, and 180 ° and has a square pin, for the transmission of the movement, the section of 7 mm and length 45 mm.
Materials: die-cast aluminum shaft, rotor galvanized zamak, cast aluminum lid, sottorosetta plastic resin framework and galvanized steel screws.
On request it is also possible to have the model Cremona First Key, Euro or Asia. If you are interested contact us.