Carrello 0

Anta Ribalta 3D Futura for Cremonese Basic configuration Giesse

Giesse
Brands: Giesse
Code: A/R 3D CR
€ 0,00
Prices excluding VAT
You have chosen:

Unavailable
Anta Ribalta 3D Futura for Cremonese Basic configuration Giesse

future giesse


Giesse door fore future 3D

This configuration for folding door contains the following items Giesse:
article Description Amount Color
04704 base assembly hardware for Cremonese 1 neutral
04711xxx lower and upper hinges Group 1 choice
04285000 arm type 2 from 575 to 1700mm microventilato * 1 arm neutral
04284000 arm type 1 from 410 to 570mm microventilato * 1 arm neutral
04353000 arm type 0 from 350 to 410mm
not microventilato
* 1 arm neutral
01039xxx Cremonese model Before ** 1 choice

The choice of color is determined by the customer selecting the appropriate option.

* You will be given one arm between the three proposed (your choice by selecting the second option).

** On request it is also possible to have the model Cremona First Key, Euro or Asia.

Optional items (sold separately on Windowo):
  • vertical and horizontal additional closures (Art. 04.77 million), required for doors with a height or width greater than 1200mm;
  • Additional arm (art. 04301000), which is compulsory for windows and doors with increased leaf width of 1020mm;
  • Items to be used in case of a second door (combined group door hinges art. 04711xxx, hinge connecting arm combined with art. 04728000, bidirectional deadbolt Art. 02191000 and meeting its superior art. 01348000).


Code: 04704
locking mechanisms to Anta Ribalta for Cremonese, in the Base version. Referral, towing, toe movement and meetings in zama with GS Silver Plus finish (up to 500 h of corrosion resistance). Screws and set screws in stainless steel. Raising polyamide.



Code: 047011
Group hinges (upper and lower), completely pre-assembled and ready to be installed on the profile. Body in extruded aluminum and brass hinges. Supports in zamak with GS Silver Plus finish (up to 500 h of corrosion resistance). Pins, screws and set screws in stainless steel.



Code: 04285 (Arm Type 2) - 04284 (Arm Type 1) - 04353 (Arm Type 0)
Allow the flap opening in conjunction with the mechanisms. Body, fixing block and drawstring in zama with GS Silver Plus finish (up to 500 h of corrosion resistance). Rod, rod, screws and stainless steel screws. Diskette stop polyamide.







Code: 01039 - Cremonese Prima
Cremone bolt on both sides for the actuation of the Giesse mechanisms.

Handle in die-cast aluminum. Cash Cremona, gear racks and sliding of marine aluminum. Inner sheath and base Hostaform spring, screws and fixing plate in stainless steel. In the version in brass, chest and neck are made of brass. Equipment: 1 fixing plate and 2 M5x14 screws TCCE.

The use of die-cast materials of quality and the adoption of the Giesse painting system ensure high mechanical quality and uniformity of color and strong resistance to abrasion.

On request it is also possible to have the model Cremona First Key, Euro or Asia. If you are interested contact us.



Products that might interest you

Recently viewed products

Newsletter

Seguici

© Windowo All rights reserved - VAT: 02324570221 Software Ecommerce by Daisuke ®