Window Metallic Torggler Silicon Sealant Neutral Metallic Effect 310 ml
Neutral silicone
Torggler Window Metallic, silicone sealant:
- Resistant to UV rays and bad weather;
- Low elastic modulus;
- Indoor and outdoor use;
- 3 colors available.
Neutral silicone sealant with metallic effect for glazing and window frames
Silicone Window Metallic is a
neutral silicone sealant with a low modulus of elasticity, resistant to UV rays and atmospheric agents, ideal for use in
glazing and
windows and doors in general. It complies with UNI 11673-1, “Installation of windows and doors - Part 1: requirements and design verification criteria”.
Thanks to
the neutral cross-linking, it does not develop unpleasant odors during application, it does not release acid or basic substances that can corrode the metal supports and it does not damage the paints. It has excellent adhesion to both porous (masonry, concrete, plaster, wood) and non-porous (metal, plastic, glass, glazed and porcelain surfaces) substrates.
Thanks to the presence of metal powders in the formulation, it combines perfectly with metal profiles with
a metallic effect , camouflaging the joint. Silicone Window Metallic is classified according to UNI EN 15651 as a non-structural sealant for facades (type F) and for glazing (type G).
Silicone Window Metallic Torggler fields of use
Torggler Window Metallic silicone is ideal for:
- sealing between glass and window frame (metal, pre-painted, wood or plastic);
- waterproof sealing of the connection joints between the window frame and the wall (masonry, concrete, plaster);
- sealing between elements of sheet metal , painted and unpainted.
Its characteristics are such as to allow the seals to
absorb the movements transmitted to the windows and the window frame by atmospheric, vibrational and mechanical stresses.
Silicone Window Metallic
elastically connects the window frame to the masonry, absorbing, without detachment, the movement of the neighboring building elements, originating from differential thermo-hygrometric dilations or settlements. It therefore guarantees a perfect seal over time to water and air, reducing heat loss.
Maximum thicknesses achievable with Window Metallic silicone
Sizing of the joint
- Minimum width = 6 mm.
- For widths up to 10 mm the depth must be equal to the width of the joint and in any case not less
- to 6 mm.
- For widths from 10 to 20 mm the depth must be at least 10 mm.
- For widths over 20 mm the depth must be at least half the width.
Window Metallic Torggler Sealant Warnings
Silicone Window Metallic is not suitable for structural bonding. Not suitable for marble or natural stone substrates. In these cases, use Silicone Universal.
Instructions for installing Torggler silicone
- The sides of the joint must be clean, degreased and dry. With porous substrates it is recommended to treat in advance with Silicone Primer. In deep expansion joints, plug with rigid expanded profiles,
- before sealing. Stretch an adhesive tape along the sides of the joint;
- Insert the cartridge in the special gun, open it, screw the nozzle and cut the tip in order to obtain a sufficient opening;
- Inject the sealant in abundance;
- Smooth with a spatula moistened with Smooth within 5 minutes of application, exerting a certain pressure in order to eliminate air gaps;
- Remove the adhesive tape immediately after smoothing.
Cleaning tools in the plastic state of the sealant with solvents; after hardening only mechanically.
Torggler silicone sealants for sale online on Windowo
The world of sealants offers a
variety of professional solutions that allow for different uses. In fact, Torggler silicones are formulated to best meet these needs in all applications: from the most technological and advanced in the industry, to the most common quality DIY.
Where to buy Torggler silicones? The range of Torggler sealant products is for sale online in the Windowo shop at special prices.
