Battuta Inner Door seal for aluminum systems Eku53 / 53TT / 64TT / 72TT and Kompact 400m Complastex
For aluminum profiles systems: Eku53 / 53TT / 64TT / 72TT and Kompact.
Rubber gasket inside balloon coextruded thermoplastic rubber.
Cod. Sections 126-3851
Material: Thermoplastic Co-Extruded Rubber.
Coil 400 Meters.
Color = Material.
Slip material
Aiming to improve the quality of products offered to its customers, Complastex has developed a range of formulations of thermoplastic rubbers polyolefins fi niche is particularly suitable for use as seals for doors and windows.
The thermoplastic rubber joins mechanical characteristics similar to EPDM, the processability of thermoplastic materials, simpli fi fying the realization of pro fi a complex geometry and co-extruded in various colors.
The main characteristics of the thermoplastic rubber are the following:
- Excellent resistance to sunlight and to 'aging.
- Operating temperature from -30 to 100 ° C.
- Low permanent deformation in tension and compression (compression set).
- High dimensional stability which minimizes the inconvenience of withdrawal.
Seals Thermoplastic rubber can be used outside of the frames without the verification of those decay
characteristics, hardening or withdrawal and reduces performance of the frame.
The junction of the corners can be performed by hot plate welding or for cold gluing with speci fi c "primer" and cyanoacrylate adhesives
of our formulation.
The raw materials that make these rubber seals Thermoplastic stem from a careful selection and control, and based on the speci fi c performance requirements, based on tests conducted in reference to national and international standards (UNI, ISO, ASTM, DIN. ..).
