Carrello 0

Aprimatic R251 FE Swing Gate Motor Residential Use

Aprimatic
Brands: Aprimatic
Code: R251 FE
€ 156,74
Prices excluding VAT
Are you looking for a product of Aprimatic catalog not present on our site? Contact us and ask for a quote.

- +

Motor for Aprimatic R251 FE swing gate

Aprimatic electromechanical actuator model R251 FE (electronic limit switch) , low voltage, for swing gates.
This gate motor has been designed for residential use .

The "FE" model is equipped with electronic limit switches (by means of internal microswitches), suitable for systems where it is not possible to use a floor stop. The adjustment of the electronic limit switches is possible only with the use of the BA24 control unit and the limit switch optional card.

Swing gate motor Aprimatic R251 FE

Electric motor for swing gate R251 FE Aprimatic: technical data

  • Mains power supply: 230Vac - 50Hz
  • Motor power supply : 24Vcc
  • Maximum leaf width without electro-welding : 1.8m
  • Maximum leaf width without electro-welding : 3m
  • Maximum leaf weight : 300kg (for 3m leaf) - 500kg (for 1.8m leaf)
  • Maximum number of cycles : 50 cycles / day
  • Degree of protection : IP44
  • Power consumption : 48 W
  • Current consumption : 2 A
  • Maximum thrust force : 2500 N
  • Rod stroke : 400 mm
  • Linear speed : 16 mm / s
  • Operating temperature : -20 ° + 50 ° C
  • Anti-crushing safety : Electronic

Read the features of the R251 FE Aprimatic swing gate motor

24V electromechanical arm with electronic limit switch adjustment (via internal microswitches). Suitable for systems where it is not possible to use a ground stop. The adjustment of the electronic limit switches is possible only with the use of the BA24 control unit and the limit switch optional card.

Completely self-learning programming with the possibility to vary the parameters through simple adjustment of Dip Switch and trimmer on the card.

Adjustable and pre-drilled rear bracket . The arms are equipped with mechanical limit switches that allow you to adjust the desired stroke. For leaves longer than 1.8 meters, the use of an electric lock is recommended.

Continuity of service guaranteed , in case of black-out, by two optional emergency batteries.

How to mount a swing gate motor?

The ideal installation of the R251 FE Aprimatic swing gate motor (with 1.8m leaf) involves the use of other accessories such as:
  • R251 FE actuator - Go to the product sheet by clicking here
  • AP350 left actuator
  • AP350 right actuator
  • BA230 electronic control unit with integrated 433.92 Mhz radio receiver
  • TM4L - 433.92 MHz four-channel transmitter
  • ET2N-W 24V flashing light
  • Pair of ER48 photocells (12V-24V)
  • ANT433 - 433.92 MHz antenna with 4.5 m coaxial cable ref. to mass
  • PC12E - Wall-mounted key button

Aprimatic: automations for swing gates

Aprimatic is the Italian company specialized in the production of motors and automation kits for automatic gates. In addition to this, the Emilian company produces motors for roller shutters, shutters, windows and garage doors. If you are looking for automatic gate systems, rely on Aprimatic's Made in Italy quality. On Windowo you will find the best at discounted prices.

Aprimatic automatisms for swing gates

Products that might interest you

Recently viewed products

Newsletter

Seguici

© Windowo All rights reserved - VAT: 02324570221 Software Ecommerce by Daisuke ®