Reflectiv INT 120 Glass Film with Central White Stripe for Office Privacy

Reflectiv INT 120 glass film - Provides privacy in the office with a thin white stripe in the center

Decorative film with thin diffused degressive white central stripe: ideal for confidentiality in the working environment. Typically, INT 120 office privacy film is used to hide computer monitors and the upper body of seated people.

This decorative degressive film can be used to hide a specific area of a window, wall or piece of furniture with glass. Reflectiv INT 120 film stands out with its thin diffused white central stripe, a degressive design that offers a perfect balance between aesthetics and practicality.

The ease of application and quality of the materials make Reflectiv INT 120 film a popular choice in both home and professional settings. Whether it is increasing privacy in a meeting room or adding a design element in a living room, the Reflectiv INT 120 adapts with elegance and discretion to different contexts.
  Image with the square footage describing the beginning and end of the diffusion:

 

Technical characteristics of Reflectiv INT 120 film

INT 120 Reflectiv is a white decorative film for internal application with a dot pattern. The full part of the film is 20cm wide.
 

• Support: PET;
• Color: white;
• Adhesive: Acrylique Polymère 13 G/M2;
• Protector: 23 microns silicone PET;
• Thickness: 23 microns;
• Application side: Internal;
• Fire classification: B-S1,D0;
• Application temperature: Min + 5°C;
• Standards: Euroclasses;
• Warranty: 10 years internal (without direct exposure to the sun);
• Durability: 12 to 15 years for vertical application in Central Europe;
• Use: for all types of glass;
• Maintenance after 30 days: with a normal detergent solution (non-abrasive, ammonia-free, etc.). Cleaning products that may scratch should be avoided;
• Storage: 2 years from delivery. This film should be stored away from excessive humidity and direct sunlight, at a temperature below 38°C.

 

How is a Reflectiv adhesive film applied?

The surface to be glued must be free of dust, grease or other contaminants. Some materials such as polycarbonate can cause bubble problems. We therefore recommend a compatibility test.

Installation equipment: water sprayer, scraper, utility knife, tape, putty knife, float, paper towel.
 

1. Clean the glass;
2. Pre-cut the film;
3. Glue two pieces of tape in one corner of the film;
4. Spray the window and stick the film with the adhesive side facing you;
5. Remove the adhesive film;
6. Wet the adhesive side thoroughly;
7. Turn the film over and apply the adhesive side to the glass;
8. Spray the film to allow the squeegee to slide well on the glass;
9. Press with spatula;
10. Trim the edges with a cutter;
11. Shape the glass again and clean the edges.

 

Reflectiv white degressive films - experience the quality first hand!

These degressive decorative films from Reflectiv represent an excellent solution for those who want to combine aesthetics and functionality. With a white central stripe that gently fades, these films offer a perfect balance between privacy and transparency.

The quality of Reflectiv films is immediately perceptible to the touch. Their composition is designed to ensure easy application and long life. Furthermore, thanks to their thin but resistant structure, these films are an ideal choice for both domestic and professional environments. They are easy to clean and maintain their aesthetic characteristics over time, effectively resisting scratches and wear.

The installation of Reflectiv films is simple and intuitive, allowing anyone to quickly transform the desired space. Whether it's an office, a meeting room, or a corner of your home, these films add a touch of class without compromising functionality.

• Scheda tecnica pellicola Reflectiv INT 120 (348,86 KB)
• Fiche technique du film Reflectiv INT 120 (666,10 KB)