Striped adhesive window film - Reflectiv INT 245 with 45 mm stripes. This decorative film is the ideal solution for obtaining privacy and light filtering in offices and rooms of various uses.
Delivery time: approximately 5 working days.
Are you looking for a film ofReflectiv catalog not present on our site? Contact us and ask for a quote.
Striped Adhesive Window Film - Reflectiv INT 245 with 45 mm lines - Privacy and Light Filter
Reflectiv INT 245 is an adhesive window film with a 45 mm frosted stripe pattern.
Reflectiv decorative films allow you to personalize a window, a partition or a glass piece of furniture while preserving privacy. Furthermore, these window films attenuate the light without reducing the brightness and bring a touch of originality to the decoration of your projects.
Reflectiv is the largest European manufacturer of self-adhesive window films. The renowned Reflectiv brand stands out not only for the innovative quality of its products, but also for its dedicated approach to sustainability, optimized logistics management and the ability to revolutionize any glass surface through the use of its adhesive films.
INT 245 Reflectiv is an interior decorative film and features a 45mm frosted stripe pattern.
Technical characteristics of Reflectiv INT 245 film
INT 245 Reflectiv is a decorative film for internal application.
Support: PET;
Color: Colorless;
Adhesive: Acrylique Polymère 13 G/M2;
Protector: 23 microns silicone PET;
Thickness: 23 microns;
Application side: Internal;
Fire classification: B-S1,D0;
Application temperature: Min + 5°C;
Standards: Euroclasses;
Warranty: 10 years internal (without direct exposure to the sun);
Durability: 12 to 15 years for vertical application in Central Europe;
Use: for all types of glass;
Maintenance after 30 days: with a normal detergent solution (non-abrasive, ammonia-free, etc.). Cleaning products that may scratch should be avoided;
Storage: 2 years from delivery. This film should be stored away from excessive humidity and direct sunlight, at a temperature below 38°C.
How to apply Reflectiv adhesive window film?
The surface to be glued must be free of dust, grease or other contaminants. Some materials such as polycarbonate can cause bubble problems (a compatibility test is therefore recommended).
Installation equipment : water sprayer, scraper, utility knife, tape, putty knife, float, paper towel.
Clean the window;
Pre-cut the film;
Glue two pieces of tape to one corner of the film;
Spray the window and stick the film with the sticky side facing you;
Remove the adhesive film;
Wet the adhesive side thoroughly;
Turn the film over and apply the adhesive side to the glass;
Spray the film to allow the squeegee to slide well on the glass;
