Carrello 0

Solar Film for Glass Reflectiv SOL 102 79% Protection External Installation

Reflectiv
Brands: Reflectiv
Code: SOL 102
-25%
€ 55,33 € 73,77
Prices excluding VAT
Reflectiv SOL 102 solar window film offers effective protection from the sun with a 79% reduction in solar radiation , and is designed specifically for an outdoor application.

This film is ideal for those looking to reduce heat and solar glare in environments exposed to intense sunlight, significantly improving internal comfort and promoting energy savings.
Delivery time: approximately 5 working days.

Are you looking for a film of Reflectiv catalog not present on our site? Contact us and ask for a quote.

- +

Solar Window Film - Reflectiv SOL 102 - 79% Protection - External Application

Reflectiv SOL 102 solar window film was specifically developed to attenuate the heat and glare produced by the sun's rays. This film is ideal for environments exposed to strong sunlight, where it ensures a significant increase in comfort.
 

Reflectiv SOL 102: window film for 79% sun protection

The use of Reflectiv SOL 102 significantly contributes to improving internal well-being, making spaces fresher and more pleasant. Furthermore, this solar film promotes considerable energy savings , especially in the presence of air conditioning systems, thanks to its ability to block up to 79% of solar radiation.

Pellicola Solare per Vetri - Reflectiv SOL 102 - Protezione 79% - Applicazione Esterna

Pellicola Solare per Vetri - Reflectiv SOL 102 - Protezione 79%
 

Sun Protection 79% - Metallic Silver - External Application

Reflectiv SOL 102 solar film offers 79% solar protection and is specifically designed for external installation on glass windows. This film is ideal for mitigating heat and solar glare, bringing a significant improvement in comfort in environments exposed to direct sunlight. Its external application effectively contributes to energy saving, especially when using air conditioning.
 

Composition and Durability

Reflectiv SOL 102 solar films are composed of two layers of vacuum metallized polyester, a strong adhesive and a protective film that is removable during installation. They are also designed to be scratch resistant, ensuring durability and quality over time.
 

Solar Factor and Greenhouse Effect

The solar factor (G) indicates the ratio between the total energy that penetrates an environment through the glass and the incident solar energy. This energy includes both the direct transmission of sunlight and the heat generated by the energy absorption of the glazing. The greenhouse effect occurs when solar energy, entering through glass, is absorbed by internal objects and walls which, once heated, emit thermal radiation. Glass, even if transparent, blocks radiation at wavelengths greater than 5μm, thus retaining heat within the environment. This phenomenon is especially noticeable in enclosed spaces such as a car parked in the sun with the windows closed.

Pellicola Solare per Vetri - Reflectiv SOL 102 - Protezione 79%

Pellicola Solare per Vetri - Reflectiv SOL 102
 

Characteristics of SOL 102 solar adhesive film

  • Total Solar Energy Rejected: 79%
  • Solar Energy Reflection: 65%
  • Solar Energy Transmission: 11%
  • Solar Energy Absorption: 24%
  • Solar G Factor: 21%
  • UV Block: 99%
  • Support: PET
  • Adhesive: Polymeric acrylic 19 g/m2
  • Protector: 20 micron siliconised PET
  • Thickness: 85 microns
  • Color: Metallic Silver
  • Application Side: External
  • Application Temperature: min, + 5°C
  • Standards: EUROCLASES
  • Fire classification: B-s1, d0
  • Warranty: 5 years

Reflectiv Window Films
 

How to install a Reflectiv solar film?

The surface where the film will be applied must be clean of any trace of dust, grease or other impurities. It is important to note that some materials, such as polycarbonate, may cause the formation of bubbles, making it advisable to carry out a preventive compatibility test.

Tools needed for installation include: a water sprayer, a scraper, a cutter, tape, a putty knife, a float and paper towels.
 
  1. Clean the glass surface carefully;
  2. First cut the film to the desired dimensions;
  3. Apply two pieces of tape to one corner of the film to make handling easier;
  4. Spray the window with water and position the film, holding the adhesive side towards you;
  5. Remove the protective film;
  6. Abundantly moisten the adhesive side of the film;
  7. Turn the film over and apply the adhesive side to the glass surface;
  8. Spray the film to facilitate the sliding of the squeegee on the glass;
  9. Smooth with the spatula to eliminate air bubbles and excess water;
  10. Trim the excess edges using the cutter;
  11. Model again on the glass and clean the edges for a perfect finish.

Products that might interest you

Recently viewed products

Newsletter

Seguici

© Windowo All rights reserved - VAT: 02324570221 Software Ecommerce by Daisuke ®