Carrello 0

Door Spacer HD PosaClima InDoor Frame Spacer in Polyester Fibre

PosaClima InDoor
Code: DOOR SPACER
-25%
€ 0,11 € 0,14
Prices excluding VAT
Door Spacer HD PosaClima InDoor is a 4mm thick and 20mm diameter spacer made of high density polyester fibre, prevents deformation of the door frame.
Minimum order quantity: 200
Pack of 200

- +

Door Spacer HD PosaClima InDoor - 4mm thick polyester fiber spacer

Door Spacer HD PosaClima InDoor is a 4mm thick, 20mm diameter spacer made of high density polyester fiber which prevents deformation of the door frame during the expansion of the foaming adhesive.

Door Spacer HD PosaClima InDoor - Distanziale in fibra di poliestere spessore 4mm

Door Spacer HD PosaClima InDoor: fields of application

Spacer for mounting internal swing doors . Made of polyester fibre, it is recommended in the PosaClima Indoor Premium Plus system.

Door Spacer HD PosaClima InDoor - Distanziale Telaio Porta - in Fibra di Poliestere

Door frame spacer processing

During the installation of internal swing doors, after having locked the frame in position and checked the lead wire, proceed with the closing test of the door. At this stage it is recommended to use two special spacers, to be applied to the door stop, one above the handle and one approximately 20cm from the base, before closing the door.

The shims will preventively counteract possible deformations of the frame due to the expansion of the foaming adhesive. After the foam adhesive has dried, the spacer can be removed without any problems.

Particularly useful in the winter period, to avoid possible post-expansion problems. In cases of low temperature and/or high thickness of adhesive applied, especially in conjunction with renovation work involving the elimination of part of the false frame, it is recommended to remove the spacer no earlier than 48 hours after applying the adhesive.

The PosaClima Door Spacer can be glued on itself to obtain a double thickness.

PosaClima InDoor: montaggio porte interne senza viti

PosaClima InDoor system: mounts the doors without using screws

PosaClima InDoor Premium Plus reinvents the installation of internal swing doors , eliminating the need to use screws.

This advanced technology was developed to address common challenges in installing internal doors, such as the slow and difficult insertion of screws under frame seals, the complexities of drilling iron frames into plasterboard walls, the problems of correcting with screws crooked or misshapen wooden frames, and the instability of the fixing during renovation work (especially when removing part of the old false wooden frame, affecting the support of the new frame).

Products that might interest you

Recently viewed products

Newsletter

Seguici

© Windowo All rights reserved - VAT: 02324570221 Software Ecommerce by Daisuke ®